Heating Recommendations
The following recommendations will reduce the amount of time required to heat a pool. If unsure of equipment heating capability, review equipment data plate. See "Identifying Model Specifications"
- Confirm heat pump mode has been set to heating mode.
- Set the desired temperature (set-point) for the water.
- Temporarily set the filter pump for continuous operation.
- This will allow the Heat Pump the time required to heat the water at start-up.
- After the water has reached the desired temperature, reset the filter pump to normal operating time-frames.
- Activate Turbo Boost Mode if equipped.
- Use a pool cover or blanket to reduce heating time.